Can you put a touch screen stereo in any car
Yes, you can. In this case, you are limited to two options based on the space left on the dash after removing the old stereo. You should note that older cars have space for small-size car stereo.
There is no point in keeping your stock stereo. The modern technology of touch screen stereos allows you to change the system and adjust its volume with the only touch of a finger. In fact, self-installing the touch screen stereo can save you a lot of dollars in labor and installation fees. The work can be done with only a few hours of concentration and work. With the right tools and planning, the process should go smoothly. These are tips to help you install a new touch screen stereo in any given car.
Make a Plan
Before you turn a screwdriver and ripping into the dashboard, you should set aside time to plan your installation process. In fact, without a detailed plan, you will not get anywhere. Ensure you read all instructions of each component to create an installation plan. Understand what you have and where each piece will go and the tools you need to make the installation a success.
Other than the new equipment, you need wire cutters, crimpers, pliers, tape, rubber mallet, drill, flashlight, double-sided tape, and wire tubing. Ensure you have all of them with you and then follow these steps:
Replace the Head Unit
First, you have to ensure you purchase the right head unit, and it should be of appropriate size. Usually, the head units classified into single-din or double-din. Remember that depths, although they are standard, are likely to vary. Therefore, you should pay attention to the available space you have.
If you want to make the installation process easier, you should buy a wire harness that is designed to suit your vehicle’s model and make. That can save you from the need of having to cut the wires inside the dash.
Powering Your System
In this case, you need to have an install diagram at hand. The entire system should be powered through the amp. Thus, you should choose one with adequate juice and can support the different channels your system requires. You can make things a lot easier by buying an amp-install kit. The main power lead ought to be connected to the battery.
Install Your Sub and Speakers
Remember that the speakers and subwoofers make up your system. The set can make the stock radio quite great, and choosing a set needs more than comparing specs. You can get out into the showrooms and find sets that match your acoustic preferences. Ensure you hide the wiring as much as possible.
Hit the Road
After some stressful hours, minor cuts, and even some aggravation, you are finally done. Nevertheless, the endeavor is worth it. Before you hit the road, ensure you clean up the wiring tapes, tubing, and other wastes. Install the fuse when you are ready to test the system. When everything is connected and working properly, you can hit the road.